Changing the Transceiver's Mode
Buttons representing the modes supporting by your radio appear in the Main window's Mode panel, and identify the radio's current mode. To change your radio's mode, click the appropriate button in the Mode panel. You can also change your radio's mode by selecting a [Memories:memory].
Button |
Action |
LSB |
selects lower sideband modulation |
USB |
selects upper sideband modulation |
CW |
selects continuous wave |
CW-R |
selects continuous wave, reversed |
RTTY |
selects radioteletype |
RTTY-R |
selects radioteletype, reversed |
FM |
selects frequency modulation |
WBFM |
selects wide-band frequency modulation |
AM |
selects amplitude frequency modulation |
PKT |
selects packet |
PKT-R |
selects packet, reversed |
Data-L |
selects data mode with lower sideband modulation |
Data-U |
selects data mode with upper sideband modulation |
If your radio supports Filter Groups and the restore Filter Group on mode change box is checked, the caption on each mode button will indicate the last Filter Group used in that mode. In this case, clicking a mode button both directs your radio to change mode, and establishes receiver bandwidth settings specified by that Filter Group.